ProfiTherm D-3 Sensor

ProfiTherm D-3 – moisture sensor for gutters (anti-icing system), with heating and a 10m-long cable. This sensor registers the presence of moisture.

It is designed for installation in gutters, rainwater pipes, etc. It can be installed together with ProfiTherm D-1 external temperature sensor. If necessary, two sensors of ProfiTherm D-3 type can be connected in parallel.

The sensor is installed in a gutter or rainwater pipe on the sunny side of the building. The sensor’s contact piece should be placed towards the melt water flow. Compatible with ProfiTherm K-2, ProfiTherm K-3 controllers.

The sensor cable can be extended to 100 m using a conventional mounting cable with copper conductors and a cross section of 4×1.5 sq. mm.

ProfiTherm D-3 – moisture sensor for gutters (anti-icing system), with heating and a 10m-long cable. This sensor registers the presence of moisture.

It is designed for installation in gutters, rainwater pipes, etc. It can be installed together with ProfiTherm D-1 external temperature sensor. If necessary, two sensors of ProfiTherm D-3 type can be connected in parallel.

The sensor is installed in a gutter or rainwater pipe on the sunny side of the building. The sensor’s contact piece should be placed towards the melt water flow. Compatible with ProfiTherm K-2, ProfiTherm K-3 controllers.

The sensor cable can be extended to 100 m using a conventional mounting cable with copper conductors and a cross section of 4×1.5 sq. mm.

• Dimensions (LxHxW): 105х20х30 mm
• Operating temperature range: Т = (- 40..85)˚С
• Heating power: at 24VDC 2.5 W
• IP rating: IP54
• Type of cable extending the sensor: H07RNF 4G1
• Diameter of cable extending the sensor: ø 10.2mm
• Length of cable extending the sensor: L = 10m
• Warranty: 2 years