ProfiTherm D-4 Sensor
ProfiTherm D-4 – soil temperature and moisture sensor (snow melting system), with heating and 10m-long cable. This sensor registers the temperature and presence of moisture.
It is designed for outdoor installation on the soil surface in open areas. If necessary, two sensors of ProfiTherm D-4 type can be connected in parallel.
The sensor is installed in open areas, in places where snow or ice build-up is most accumulated, with a sensing element up, on a solid surface in a concrete base, so that its surface is level with the surface of the soil. Where asphalt pavement is used, a concrete niche should be arranged around the sensor. To protect the sensor cable, it is recommended to lay it in the mounting pipe. Compatible with ProfiTherm K-2, ProfiTherm K-3 controllers.
The sensor cable can be extended to 100 m using a conventional mounting cable with copper conductors and a cross section of 6×1.5 sq. mm.
- Sensing element: NTC12k
- Dimensions (LхH): 60х40 mm
- Operating temperature range: Т = (- 40..85)˚С
- Heating power: at 24VDC 2.5 W
- IP rating: IP54
- Type of cable extending the sensor: Z1Z1-K 7G1
- Diameter of cable extending the sensor: ø 9.5 mm
- Length of cable extending the sensor: L = 10m
- Warranty: 2 years